NoteAction
xx1200001237
Secure the cable harness to the bracket
inside the frame hole, with a cable tie.
8
xx1300000542
Refit the frame metal clamp.9
Refitting and reconnecting the SMB and BU units
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section The unit is sensitive to ESD on page 31
2
Continues on next page
262 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.4.2 Refitting the cable harness
Continued
To Next Page
Loading...
