NoteAction
xx1300000782
Apply locking liquid (Loctite 2701) on the threads
of the screw, first entering the threads in the
frame.
11
Tightening torque: 180 Nm
xx1200001279
Secure the shaft with screw and washer.12
xx1200001278
Fit the VK-cover.13
Grease: 3HAA1001-294
xx1300000783
Unscrew both screws in link ear and fill the bear-
ing with grease from the upper hole until the
grease appears in the lower hole.
14
Refit the two screws and wipe clean from residual
grease.
15
Continues on next page
458 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.6.1 Replacing spherical roller bearing, link ear
Continued
To Next Page
Loading...
