ABB IRB 6700 Series - Page 487

NoteAction
A
B
C
D
xx1400001996
Radial sealing with dustlip(2 pcs)A
Retaining ring bore (2 pcs)B
VK-cover (2 pcs)C
Groove ball bearing (2 pcs)D
IRB 6700 -300/2.70, -245/3.00
Use caution and put radial sealing and
groove ball bearing onto the shaft end
manually.
6
Put the shaft end with the fitted parts, on
the threaded bar.
7
Manually press the shaft end into the cradle
a little.
8
Continues on next page
Product manual - IRB 6700 487
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.6.3 Replacing the rear bearings on the balancing device
Continued