NoteAction
VK cover: (3 pcs)
xx1600000194
Refit the VK covers.8
Remove lifting accessories and lifting eyes.9
Preparations before refitting the axis-6 motor
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
10
Remove old paint residues and other contamina-
tion from the contact surfaces on both motor and
gearbox.
11
Wipe clean the contact surfaces from any remain-
ing contamination.
12
Also wipe clean the o-ring groove.
O-ring, 3HAB3772-107
xx1200001019
Make sure the o-ring is undamaged.
Replace if damaged.
13
Continues on next page
Product manual - IRB 8700 335
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.3 Replacing the axis-6 unit
Continued
To Next Page
Loading...
