NoteAction
xx1500002038
Unscrew the M6x30 hex socket head cap
screws that secure the hub.
Note
Do not remove the M6x16 torx pan head
screws.
2
CAUTION
Whenever parting/mating the hub pinion
and gearbox, the gears may be damaged
if excessive force is used.
3
Attachment screws: M6x110 (2 pcs)
xx1500002081
Fit two screws in opposite holes of the hub
and use them as removal tools.
4
xx1500002326
Lift out the hub carefully.5
Continues on next page
692 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.3 Replacing the axis-2 gearbox
Continued
To Next Page
Loading...
