NoteAction
Shackle: SA-10-8-NA1
xx1400000729
Connect another roundsling to the first one
with a shackle.
4
Attach the roundslings to an overhead
crane (or similar) and raise to take the
weight of the gearbox.
5
Attaching the axis-2 gearbox to frame, step 1
NoteAction
Mercasol
xx1500002349
Apply Mercasol (40 mm from the lower arm side)
on the contact surface.
1
Note
Area where to apply Mercasol, 40
mm wide, from the lower arm side.
Mercasol
xx1500002350
Apply Mercasol on the surface of the sealing ring
and attach it on the gearbox.
Note
Make sure that the sealing ring is attached cor-
rectly on the gearbox.
2
Continues on next page
702 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.3 Replacing the axis-2 gearbox
Continued
To Next Page
Loading...
