GLA531 Series LGR-ICOS™ Gas Analyzer
Operating Manual
3KXG165002R4201_2021_04
ABB PROPRIETARY INFORMATION 27
Figure 22 User Interface for Mounting the USB Memory Dongle
Setup Button
To change configurations and system set-ups, click Setup on the Control Bar to access the Setup screen shown
in Figure 23: The Time/Files screen is displayed by default.
Selection tabs in the Setup screen are:
• Time/Files: set time and file format
• Calibration: single-point calibration using a known reference standard
• Laser Adjust: manually fine-tune laser wavelength for goodness of fit (GOF) if necessary
• 4–20 mA: set the scale for concentration-to-mA conversion
• Service: only accessible by ABB service personnel
To Next Page
Loading...
