Navigator 600 Silica
Single-stream Appendix E – Web Server
80 IM/NAV6S/SS–EN Rev. E
Appendix E – Web Server
The analyzer is fitted with an ethernet card as standard and,
when the appropriate configuration settings have been made,
users can access the analyzer's data via an Ethernet network.
In addition, files can be transferred to and from the analyzer via
an FTP connection.
a Log On – click to log on to the analyzer to enable
configuration access.
b Analyzer View – displays the current screen of the
analyzer. If the analyzer has a screen-saver set, it does not
affect this view.
c Access Buttons – provides access to the analyzer's data
if the user has the appropriate access permission.
– Stream Values – see Appendix E.1, page 81.
– Reagent & Solution Levels – see Appendix E.2,
page 81
– Measurement Status – see Appendix E.3, page 81
– Valve & Pump Status – see Appendix E.4, page 81
– Statistics – see Appendix E.5, page 81
– System Information – see Appendix E.6, page 81
– Logging Status – see Appendix E.7, page 81
– Operator Messages – see Section E.8, page 82
– Configuration – see Appendix E.9, page 82
d Language Selection – selects the language for the web
pages.
e Auto-Refresh – updates the analyzer view automatically.
f View Selection – selects the required analyzer view:
– Alarm / Event Log
– Audit Log
–Chart View
– Bar View
Fig. E.1 Web Server Screen
To Next Page
Loading...
