Navigator 600 Silica
Single-stream Appendix E – Web Server
82 IM/NAV6S/SS–EN Rev. E
E.8 Operator Messages
An 'Operator Message' is displayed on the chart view. For
example:
An entry is also included in the 'Alarm Event Log'.
An Instruction is displayed on the analyzer as a warning, for
example:
Operator instructions can be removed only by pressing the
key.
To send an operator message or instruction to the analyzer:
1. Type the 'User name' and 'Password'. Up to 160
characters can be used. These are the FTP username and
password that are set in the configuration – see
Section 5.8.1, page 39.
2. Type either the message or an instruction (only one field
can be populated at any one time).
3. Click the button to send the message or instruction
to the analyzer.
E.9 Configuration
E.10 FTP Access
Files can be transferred between the analyzer and a remote
computer via an FTP connection if the analyzer has been
configured with the appropriate settings – see Section 5.8.1,
page 39.
Either Microsoft
®
Internet Explorer version 5.5 (or later) or
MS-DOS
®
can be used as an FTP client.
Note. A user must be logged-on for the configuration
button to be enabled.
Change or retain
security configuration
Select a configuration previously
saved to internal storage or select
a QuickStart template
Change the analyzer's current date
and time
To Next Page
Loading...
