Note/IllustrationAction
xx1900001913
Fit the conveyor tracking module and
push the lower part until you hear a clear
clicking sound.
4
xx1900001912
Connect:
• B1.X1 - K2.X5
• B1.X7 - K4.X1-X5
5
See Application manual - Conveyor tracking.Connect wires to the input and output
connectors as required.
6
Closing the door on page 176.Close the door.7
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 166.
8
For more information about the option Conveyor Tracking, see Application
manual - Conveyor tracking.
Product manual - OmniCore V250XT 139
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the conveyor tracking module (CTM)
Continued
To Next Page
Loading...
