Note/IllustrationAction
xx2100002282
Insert the fan assembly in the slot on the
power unit.
4
CAUTION
Sharp edges. Make sure the cables are not
damaged.
Reconnect:
• FAN
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 176.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 166.
2
Product manual - OmniCore V250XT 201
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.2.4 Replacing the power unit fan
Continued
To Next Page
Loading...
