Refitting the robot signal exchange proxy
Refitting the robot signal exchange proxy
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
1
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx2100000318
Screws: Torx pan head screw M4x8 (4 pcs)Fit the robot signal exchange proxy and
secure the screws.
3
xx1900001887
Continues on next page
Product manual - OmniCore V250XT 205
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.3 Replacing the robot signal exchange proxy
Continued
To Next Page
Loading...
