Note/IllustrationAction
Refit the cable in the cabinet according
to the record during the disassembly.
2
xx1900001948
Connect the antenna cable to the connec-
ted services gateway by rotating.
3
xx1900001949
Put the magnet part of the antenna on
the top the cabinet.
4
Note
The operating conditions must be such that
there is a minimum separation distance of
20 cm between the dedicated antenna and
nearby persons.
Concluding procedure
Note/IllustrationAction
Closing the door on page 176.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 166.
2
216 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.5 Replacing the connected services gateway
Continued
To Next Page
Loading...
