ABB OmniCore V250XT - Page 272

Note/IllustrationAction
Remove the screws and lift out the robot
signal exchange proxy.
3
Removing the fieldbus master
Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
1
xx2000000419
xx1900001909
Remove the attachment screws and take
the cover off.
2
Continues on next page
272 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the fieldbus master
Continued