ABB OmniCore V250XT - Page 323

Note/IllustrationAction
xx1900002333
Take out the cables withe the cable entry
frame through the cut-out.
2
xx1900002334
Remove the attachment screws on the
frame and cover strip together.
3
xx1900002335
Remove the cover strip from the frame.4
Continues on next page
Product manual - OmniCore V250XT 323
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the cable grommet assembly
Continued