7.2 Troubleshooting fault symptoms
Fault symptoms described in this manual
This manual describes how to troubleshoot the following fault symptoms:
• No LEDs are lit on the controller on page 352
• Start-up failure on page 356
• Problem releasing the robot brakes on page 361
• Problem starting or connecting the FlexPendant on page 364
• Problem using the joystick on page 368
• Controller fails to start on page 369
• Reflashing firmware failure on page 370
• Inconsistent path accuracy on page 371
Continues on next page
Product manual - OmniCore V250XT 351
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
7 Troubleshooting
7.2 Troubleshooting fault symptoms
To Next Page
Loading...
