Note
The weight does not include any mounting kits fitted on the controller.
Transportation and storage conditions
ValueParameter
-40°C (-40°F)Minimum ambient temperature
+55°C (+131°F)Maximum ambient temperature
+70°C (+158°F)Maximum ambient temperature (less than 24
hrs)
In accordance with ETSI EN 300 019-2-2 /
Environmental class 2.3
Shock and Vibration
(No severity reduction for horizontal axes)
After storage, the operating conditions inside the controller must be met for at least
6 hours before switching on the controller (see Operating conditions on page 38).
The robot controller shall only be stored indoors, in an environment that is dry and
dust-free. In addition, wind, temperature fluctuations, and condensation shall be
avoided.
Operating conditions
The table shows the allowed operating conditions for the controller.
ValueParameter
+5°C (+41°F)Minimum ambient temperature
+45°C (+113°F)Maximum ambient temperature
2,000 mMaximum ambient altitude
In accordance with ETSI EN 300 019-2-3 /
Environmental class 3.5 (3M5)
Shock and Vibration
(Random vibration)
Note
The humidity conditions shall apply with the environmental conditions EN
60721-3-3, climatic class 3K3. For temperatures 0-30°C, the relative humidity
must not exceed 85%. For temperatures exceeding 30°C, the absolute humidity
must not exceed 25g/m
3
.
If the environmental conditions in EN 60721-3-3, climatic class 3K3, are not
possible to meet at the installation site, desiccant bags can be placed inside the
controller to achieve corresponding conditions. The desiccant bags must be
replaced regularly to maintain approved operating conditions.
Continues on next page
38 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
2 Controller description
2.2 Technical data for OmniCore V250XT controller
Continued
To Next Page
Loading...
