Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)Fit the additional drive unit and secure
with the screws.
3
Tightening torque: 2 Nm
xx2200001375
Connect:
• T4.X7 -X12, T4.X15
• T4.X17 - A1.X2
• T4.X13 - A1.X11
• T4.X5 - A1.X4
• T4.X3 - A1.X12
• T4.X1 - A1.X5
4
Concluding procedure
Note/IllustrationAction
Closing the door on page 183.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
2
130 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing additional drive units
Continued
To Next Page
Loading...
