Installing the 24V terminal block
Note/IllustrationAction
Hang the 24V terminal block to the
bracket and push the lower part until you
hear a clear clicking sound.
1
Fitting the optional power supply
Note/IllustrationAction
For DSQC 609:Fit the power supply to the bracket.
Note
For DSQC 609: Hang the power supply
to the bracket and secure the power
supply with the attached screw.
For DSQC 634: Hang the power supply
to the bracket and push the lower part
until you hear a clear clicking sound.
1
Screws: Cross recessed cheese head screw
M4x8 (1 pcs)
xx1900001908
For DSQC 634:
xx1900001950
Continues on next page
Product manual - OmniCore V400XT 133
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the power supply optional device
Continued
To Next Page
Loading...
