ABB OmniCore V400XT - Page 134

Note/IllustrationAction
For DSQC 609:Refit the end clamp besides the power
supply.
2
xx1900001907
For DSQC 634:
xx1900002443
Connect:
• T5.X1-A1.X7Terminal block
T8.X1-A1.X15Terminal block
• T6.X1-A1.X7Terminal block
T9.X1-A1.X15Terminal block
• T5.X2-24VTerminal block
T8.X2-24VTerminal block
• T6.X2-24VTerminal block
T9.X2-24VTerminal block
3
Concluding procedure
Note/IllustrationAction
Closing the door on page 183.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
2
134 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the power supply optional device
Continued