Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
3
xx2300001842
Removing the Ethernet extension switch (option)
Note/IllustrationAction
Disconnect all connectors from the unit
to be replaced.
1
xx2300001835
Carefully pull the side of the Ethernet
extension switch and rotate it tightly to
take it out from the bracket.
2
Continues on next page
206 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.3 Replacing the Ethernet switch (DSQC1035)
Continued
To Next Page
Loading...
