ABB OmniCore V400XT - Page 260

Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V400XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC30623HAC064590-001Drive unit, High Voltage
Harness A1.X4 - T4.X53HAC065225-001Harness DC-bus
Harness A1.X5 - T4.X13HAC081734-001Harness 24_SYS_DRV
Harness A1.X12 - T4.X33HAC081970-001Ethernet harness
Harness A1.X11 - T4.X133HAC081731-001Harness 24_BRAKE
Harness A1.X2 - T4.X173HAC082738-001Harness CTRL_FB
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 424.
-Standard toolkit
-ESD protective wrist band
Required documents
NoteArticle numberDocument
3HAC082020-008Circuit diagram - OmniCore
V400XT
Removing the drive unit
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Opening the door on page 182.Open the door.2
Continues on next page
260 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.2.13 Replacing the drive unit
Continued