ABB OmniCore V400XT - Page 329

Refitting the motor connection box
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Reconnect any connectors disconnected
at removal.
2
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
3
Product manual - OmniCore V400XT 329
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the motor connection box
Continued