ABB OmniCore V400XT - On-Site Installation; Required Installation Space

3.4 On-site installation
3.4.1 Required installation space
Dimensions
The following illustration shows the required installation space for the OmniCore
V400XT controller.
Min. 300 mm Min. 150 mm
xx2300001776
• A free space of 300 mm on the back of the controller is required.
• A free space of 150 mm on the sides of the controller is required.
Continues on next page
58 Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Required installation space