122 Decommissioning
9. Disconnect the control cables. The power supply from the external control
equipment must be disconnected with a circuit breaker or power switch.
10. Make sure that the disconnected cables do not cause danger.
11. If applicable, remove the protective earthing connections.
12. If applicable, remove the lock that holds the inverter.
13. Remove the locking screws from the back of the inverter.
14. To remove the inverter from the wall-mounting plate, tilt the bottom of the inverter
outwards and lift the inverter upwards.
15. Remove the wall-mounting plate from the wall.
16. Recycle the inverter and wall-mounting plate responsibly.
WARNING! Do not open the inverter. Dangerous voltages may still be present
inside, even after it is disconnected.
Recycling
Do not dispose of inverter with normal waste.
At the end of its operational life, return the inverter to any recycling facility which
receives and handles electronic goods. Alternatively, the product can be returned to
ABB. Please contact your local ABB representative for assistance.
To Next Page
Loading...
