76 Start-up
First start up
First start-up procedures
Set the AC line circuit breaker to ON at the AC distribution board.
Wait for the inverter to start.
After the start-up sequence, select the user
interface language with the up and down arrow
keys.
English is the default language.
After you select the language, wait for the control
unit to load the language.
The First start assistant opens when the inverter
starts for the first time and until the settings are
confirmed.
Push the right softkey to continue.
Next, set the date, time and their formats.
To set the date, select Date and push the right
arrow key.
Set the date with the up and down arrow keys.
Move between the day, month and year with the
right and left arrow keys.
Push the right softkey to save the date.
To Next Page
Loading...
