What to do if ABB Inverter shows HW mismatch fault?
If the ABB Inverter displays 'HW mismatch' fault: 1. Power down the inverter. 2. Restart the inverter. If the same fault occurs again, power down the inverter and contact your system supplier. The cause is that internal HW board and SW versions do not match.
What to do if ABB PRO-33.0-TL shows AC voltage measurement fault?
If the ABB Inverter displays 'AC voltage measurement' fault: 1. Power down the inverter. 2. Restart the inverter. If the same fault occurs again, power down the inverter and contact your system supplier. The cause is a fault in the internal AC voltage measurement circuitry.
What to do if ABB Inverter shows DC protection fault?
If the ABB Inverter displays 'DC protection' fault: 1. Reset the fault. 2. Monitor the inverter for a few days. If the same fault occurs again, power down the inverter and contact your system supplier. The cause is a high DC component in the output current.
How to resolve Extension AI parameterization error on ABB Inverter?
If the ABB Inverter displays 'Extension AI parameterization' error: 1. Check the correct input signal type. 2. Set the slide switch accordingly. 3. Adjust the software settings to match the positions of the slide switches in the Communications menu. The cause is that the slide switch (current/voltage input) setting on the module does not match the software settings.
How to resolve Extension I/O configuration failure on ABB Inverter?
If the ABB Inverter displays 'Extension I/O configuration failure', check the module type and correct the type setting in the Communications menu. The cause is that the extension I/O type setting and physical module type do not match.
General| Model | PRO-33.0-TL |
|---|---|
| Type | String Inverter |
| Max. DC Voltage | 1000 V |
| AC Voltage | 400 V |
| Frequency | 50/60 Hz |
| Topology | Transformerless |
| Number of MPPT | 2 |
| MPPT Voltage Range | 200 - 800 V |
| Cooling | Forced Air |
| Protection Degree | IP65 |
| Operating Temperature Range | -25 to +60 °C |
| Max. DC Power | 33.0 kW |
| Max. AC Power | 33000 W |
Explains warning symbols and their meanings for safety.
Provides essential safety instructions to prevent injury or death.
Details crucial safety rules for electrical installation and operation.
Outlines procedures for safe initial operation of the inverter.
Ensures proper matching of PV arrays with the inverter for optimal performance.
Step-by-step guide for physically installing the inverter.
Checklist items for ensuring correct mechanical installation.
Checklist items for verifying correct electrical installation.
Detailed steps for the initial startup and configuration of the inverter.
Lists and explains fault codes, their causes, and recommended actions.
Lists and explains warning messages, their causes, and recommended actions.
To Next Page