ABB PSTX250 - Parameters

62 Human machine interface (HMI) | Installation and commissioning manual | 1SFC132081M0201
6.4 Menu screen
The menu screen has 7 submenus, given in these
chapters:
Table 4 Menu screen
Chapter Description
6.4.1 Parameters Parameter settings for different
types of Softstarters.
6.4.2 Assistants Default parameters for common
applications.
6.2.4 Motor jog See chapter 6.2.4 Motor jog
6.4.3 Event Log Show the Event Log, Faults, Pro-
tections and Warnings.
6.4.4 Backup Backup parameter settings.
6.4.5 System info Show product name, type,
Firmware version etc.
6.4.6 Settings Softstarter settings such as
Language, Date and Display.
Use Navigation keys to navigate in the submenus.
Push
“Select” to enter a menu. Push “Save” to
save a new setting. Push “Cancel” to exit a setting
without saving. Push
“Back” to go back.
6.4.1 Parameters
Path in menu:
Menu XParameters
The parameter menu has 3 submenus, given in these
chapters:
Table 5 Parameters screen
Chapter Description
6.4.1.1 Complete list Shows all parameters for
advanced setup
6.4.1.2 Favorites Select favorite parameter
functions for quick selection.
6.4.1.3 Modified Shows changed parameters.
Navigation keys to navigate in the submenus.
Push “Select” to enter a menu. Push “Save” to
save a new setting. Push “Cancel” to exit a setting
without saving. Push
“Back” to go back.
6.4.1.1 Complete list
Path in menu:
Menu
XParametersXComplete list
Use the Complete list menu if a more advanced
parameter setup is necessary. The complete list menu
contains groups of parameters put in function order, such
as Start and Stop, Communication etc. For navigation,
see Figure 6.22.
Use the Navigation keys to navigate the submenus.
Push
“Select” to enter a menu. Push “Save” to
save a new setting. Push “Cancel” to exit a setting
without saving. Push “Back” to go back. For function
settings and full parameter list,
see chapter 7 Functions.
Figure 6.22
Complete list navigation
Complete list
Favorites
Modified
MENU
Parameters
Assistants
Motor jog
Pump cleaning
Event log
Backup handling
System info
Settings
6