ABB PVI-3.0/3.6/4.2-TL-OUTD - Configurable Relay Connection (ALARM)

- 59 -
000409BG
5 - Installation
Configurable Relay connection (ALARM)
The inverter is equipped with a multifunction relay with congurable acti-
vation. It can be connected with normally open contact (being connected
between the N.O. terminal and the common contact C.) and with normal-
ly closed contact (being connected between the N.C. terminal and the
common contact C.).
Different types of devices (light, sound, etc.) can be connected to the
relay, provided they comply with the following requirements:
Relay Ratings
Maximum Voltage: 230 Vac
Maximum Current: 1 A
Cable requirements
External diameter: from 5 to 17 mm
Conductor cross-section: from 0.14 to 1.5 mm
2
This contact can be used in different operating congurations that can be
selected by accessing the "SETTINGS → Alarms" menu.
+WT
-WT
N.C.
C
N.O.
+R
-R
RTN
+T/R
-T/R
RTN
LNK
ALARM
WIND
RS485
REM
13
Скачано с сайта интернет магазина https://axiomplus.com.ua/