List of components supplied
Supplied with the inverter are all the components required to correctly
install and connect the inverter
Components available for all models Qty
Bracket for wall fastening 1
Plugs and screws for wall mounting 3 + 3
M6x10 screw 1
D.18 washer 4
Perforated screw for front panel lead sealing 2
M32 Cable Gland 1
M20 Cable Gland 1
Two-hole gasket for M20 signal cable glands and cap 1 + 1
Jumpers for conguration of the parallel input chan-
nels
1 + 1
Quick t connectors (female) 4
Quick t connectors (male) 4
WAGO at head angled screwdriver 1
Male key TORX TX25 1
In addition to what is explained in this guide, the safety and installation information provided in the installation manual must be read and followed.
The technical documentation and the interface and management software for the product are available at the website.
XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
ABB solar inverters
Technical documentation 1
To Next Page
Loading...
