5. Cash
This section of the menu allows you to set the name of the currency and
the value of 1 kWh of energy produced. Setting these parameters cor-
rectly allows the actual earnings/savings achieved by the system to be
displayed.
• Name: sets the desired currency (default is EUR)
• Val/KWh: indicates the cost/incentive for 1 kWh in the chosen currency
(default is 0.50).
6. Time
Allows you to set the current date and time (not counting summer time)
7. Nation
Allows you to change the grid standard (selected at the rst switch on of
the inverter) within 24 hours when the inverter is working.
• Nation Select: set the desired grid standard
• Remaining Time: indicates the remaining time before the “Nation Se-
lect” function is blocked.
After the grid standard was set you have 24 hours to make any changes to the grid standard
value; 24 hours later the “Nation Select.” functionality will be blocked, and any subsequent
changes can only be made using a password provided on request by ABB.
8. Language
Allows you to set the language you prefer for the menus
9. Vstart
This section of the menu allows you to set the Vstart voltage (for the two
channels separately if they are congured independently) to suit the sy-
stem requirements.
We advise changing the activation voltage only if really necessary and to set it to the correct
value: the photovoltaic generator sizing tool available on the ABB website will indicate whe-
ther Vstart needs changing and what value to set it at.
10. Autotest
This section of the menu is available only for the Italian country standard.
Refer to the section on this topic in the manual.
To Next Page
Loading...
