ABB R-MAG 38kV 1250/2000A - Apx Figure 5 Ready LED Continually Flashing; Troubleshooting Flowcharts

44
10. TROUBLESHOOTING FLOWCHARTS
CIRCUIT
BREAKER
POSITION
NOTE: ENERGY
SUFFICIENT
ONLY FOR
CLOSE OPEN
OPERATION
NOTE: ENERGY
SUFFICIENT
ONLY FOR OPEN
CLOSE
OPERATION
<15 SEC
SINCE ANY
OPERATION OR
<30 SEC SINCE
POWER UP
NO ISSUE
CHECK CLOSE
COIL
CONNECTIONS &
CONTINUITY
POSSIBLE ISSUES:
1) ED2.0 BOARD BAD*
2) AUX SUPPLY LOW
3) FAULTY CAPACITORS*
OPEN
CLOSED
YES
NO
READY LED
FLASHING
*Please contact an ABB sales representative for a replacement
Apx Figure 5 Ready LED Continually Flashing