Item Description Min. Max. Default Step Unit
Dead band
L1_L2_L3
Dead band per bus zone for phases
L1, L2 and L3.
0 65535 5 1 A
Delta L0 Delta per bus zone for the neutral
current L0.
0 65535 10 1 A
Dead band L0 Dead Band per bus zone for the
neutral current L0
0 65535 5 1 A
Delta and Dead band settings that are too low, result in a high data load on the
bus. For this reason, care should be taken to set reasonable values.
1MRK 511 451-UEN B Section 3
Interbay bus functions
Distributed busbar protection REB500 13
Communication protocol manual IEC60870-5-103
© Copyright 2019 ABB. All rights reserved
To Next Page
Loading...
