Name Type Description
OUT14 BOOLEAN Output 14
OUT15 BOOLEAN Output 15
OUT16 BOOLEAN Output 16
11.7.5 Settings
The function does not have any parameters available in local HMI or Protection and
Control IED Manager (PCM600)
11.7.6 Operation principle
Integer to boolean 16 conversion function (IB16A) is used to transform an integer into
a set of 16 binary (logical) signals. IB16A function is designed for receiving the integer
input locally. The BLOCK input will freeze the logical outputs at the last value.
11.8 Integer to boolean 16 conversion with logic node
representation IB16FCVB
11.8.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Integer to boolean 16 conversion with
logic node representation
IB16FCVB - -
11.8.2 Functionality
Integer to boolean conversion with logic node representation function (IB16FCVB) is
used to transform an integer to 16 binary (logic) signals.
IB16FCVB function can receive remote values over IEC61850 depending on the
operator position input (PSTO).
1MRK 505 277-UUS C Section 11
Logic
213
Technical Manual
To Next Page
Loading...
