Name Values (Range) Unit Step Default Description
UnitName 0 - 18 - 1 Unit name Unit name
UnitNumber 0 - 99999 - 1 0 Unit number
TechnicalKey 0 - 18 - 1 AA0J0Q0A0 Technical key
15.7 Product information
15.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Product information PRODINF - -
15.7.2 Functionality
The Product identifiers function identifies the IED. The function has seven pre-set,
settings that are unchangeable but nevertheless very important:
• IEDProdType
• ProductVer
• ProductDef
• SerialNo
• OrderingNo
• ProductionDate
The settings are visible on the local HMI , under Main menu/Diagnostics/IED status/
Product identifiers
They are very helpful in case of support process (such as repair or maintenance).
15.7.3 Settings
The function does not have any parameters available in the local HMI or PCM600.
1MRK 505 277-UUS C Section 15
Basic IED functions
397
Technical Manual
To Next Page
Loading...
