ABB REB650 - DNP3 Object Group Implementations; Binary Input Data Variations

5.4 LCD part for HMI function keys control module
5.4.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
LCD part for HMI Function Keys
Control module
FNKEYMD1 -
FNKEYMD5
- -
5.4.2 Function block
FNKEYMD1
^LEDCTL1 ^FKEYOUT1
IEC09000327 V1 EN
Figure 6: FNKEYMD1 function block
Only the function block for the first button is shown above. There is a similar block for
every function button.
5.4.3 Signals
Table 18: FNKEYMD1 Input signals
Name
Type Default Description
LEDCTL1 BOOLEAN 0 LED control input for function key
Table 19: FNKEYMD1 Output signals
Name
Type Description
FKEYOUT1 BOOLEAN Output controlled by function key
5.4.4 Settings
Table 20: FNKEYMD1 Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Mode Off
Toggle
Pulsed
- - Off Output operation mode
PulseTime 0.001 - 60.000 s 0.001 0.200 Pulse time for output controlled by LCDFn1
LabelOn 0 - 18 - 1 LCD_FN1_ON Label for LED on state
LabelOff 0 - 18 - 1 LCD_FN1_OFF Label for LED off state
1MRK 505 277-UUS C Section 5
Local Human-Machine-Interface LHMI
51
Technical Manual