Section 20 Basic IED functions
20.1 IED identifiers TERMINALID
IP15060-1 v2
20.1.1 Application
M15324-3 v6
IED identifiers (TERMINALID) function allows the user to identify the individual IED in the
system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
20.2 Product information PRODINF
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
20.2.1 Application
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v9
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/Diagnostics/IED
status/Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers:
Product information data is visible on the local HMI under Main menu/Diagnostics/IED
status/Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers.
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
Figure 228: IED summary
This information is very helpful when interacting with ABB product support (for example
during repair and maintenance).
20.2.2 Factory defined settings
M11789-39 v11
The factory defined settings are very useful for identifying a specific version and very helpful in
the case of maintenance, repair, interchanging IEDs between different Substation Automation
Systems and upgrading. The factory made settings can not be changed by the customer. They
can only be viewed. The settings are found in the local HMI under Main menu/Diagnostics/IED
status/Product identifiers
The following identifiers are available:
• IEDProdType
1MRK 505 370-UEN D Section 20
Basic IED functions
Busbar protection REB670 431
Application manual
To Next Page
Loading...
