ABB REC650 ANSI - Page 473

Name Values (Range) Unit Step Default Description
OverTrigOp04 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 4 (on)
or not (off)
OverTrigLe04 0 - 5000 % 1 200 Over trigger level for analog channel 4 in % of
signal
NomValue05 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 5
UnderTrigOp05 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 5
(on) or not (off)
UnderTrigLe05 0 - 200 % 1 50 Under trigger level for analog channel 5 in % of
signal
OverTrigOp05 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 5 (on)
or not (off)
OverTrigLe05 0 - 5000 % 1 200 Over trigger level for analog channel 5 in % of
signal
NomValue06 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 6
UnderTrigOp06 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 6
(on) or not (off)
UnderTrigLe06 0 - 200 % 1 50 Under trigger level for analog channel 6 in % of
signal
OverTrigOp06 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 6 (on)
or not (off)
OverTrigLe06 0 - 5000 % 1 200 Over trigger level for analog channel 6 in % of
signal
NomValue07 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 7
UnderTrigOp07 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 7
(on) or not (off)
UnderTrigLe07 0 - 200 % 1 50 Under trigger level for analog channel 7 in % of
signal
OverTrigOp07 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 7 (on)
or not (off)
OverTrigLe07 0 - 5000 % 1 200 Over trigger level for analog channel 7 in % of
signal
NomValue08 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 8
UnderTrigOp08 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 8
(on) or not (off)
UnderTrigLe08 0 - 200 % 1 50 Under trigger level for analog channel 8 in % of
signal
OverTrigOp08 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 8 (on)
or not (off)
OverTrigLe08 0 - 5000 % 1 200 Over trigger level for analog channel 8 in % of
signal
NomValue09 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 9
UnderTrigOp09 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 9
(on) or not (off)
Table continues on next page
1MRK 511 287-UUS A Section 12
Monitoring
467
Technical manual