ABB REC650 ANSI - Binary Input Signals Bxrbdr

Name Values (Range) Unit Step Default Description
UnderTrigLe40 0 - 200 % 1 50 Under trigger level for analog channel 40 in %
of signal
OverTrigOp40 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 40
(on) or not (off)
OverTrigLe40 0 - 5000 % 1 200 Over trigger level for analog channel 40 in % of
signal
12.4.5 Binary input signals BxRBDR
12.4.5.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Binary input signals B1RBDR - -
Binary input signals B2RBDR - -
Binary input signals B3RBDR - -
Binary input signals B4RBDR - -
Binary input signals B5RBDR - -
Binary input signals B6RBDR - -
12.4.5.2 Function block
B1RBDR
^INPUT1
^INPUT2
^INPUT3
^INPUT4
^INPUT5
^INPUT6
^INPUT7
^INPUT8
^INPUT9
^INPUT10
^INPUT11
^INPUT12
^INPUT13
^INPUT14
^INPUT15
^INPUT16
IEC09000352-1-en.vsd
IEC09000352 V1 EN
Figure 215: B1RBDR function block, binary inputs, example for B1RBDR - B6RBDR
1MRK 511 287-UUS A Section 12
Monitoring
473
Technical manual