ABB RED615 - F_TRIG Function Block

Table 104: R_TRIG Output signal
Name Type Description
Q BOOLEAN Output signal
Settings
The function does not have any parameters available in LHMI or Protection and
Control IED Manager (PCM600).
3.14.1.8 F_TRIG function block
Function block
GUID-B47152D2-3855-4306-8F2E-73D8FDEC4C1D V1 EN
Figure 49: Function block
Functionality
F_Trig is used as a falling edge detector.
The function detects the transition from TRUE to FALSE at the CLK input. When
the falling edge is detected, the element assigns the Q output to TRUE. At the next
execution round, the output is returned to FALSE despite the state of the input.
Signals
Table 105: F_TRIG Input signals
Name
Type Default Description
CLK BOOLEAN 0 Input signal
Table 106: F_TRIG Output signal
Name
Type Description
Q BOOLEAN Output signal
Settings
The function does not have any parameters available in LHMI or Protection and
Control IED Manager (PCM600).
Section 3 1YHT530004D05 D
Basic functions
114 615 series
Technical Manual