ABB REG316 4 Series - Contact Bounce Filter

REG 316*4 1MRB520049-Uen / Rev. F ABB Switzerland Ltd
3-311
3.6.4. Contact bounce filter (Debounce)
A. Application
Suppresses the contact bounce phenomena of binary signals.
This function is only used for the signals of binary input modules.
B. Features
· Adjustable maximum bounce time
· The first edge of the respective input signal is prolonged by
the time ‘SupervisTime’.
C. Inputs and outputs
I. C.t./v.t. inputs:
· none
II. Binary inputs:
· Binary signals (input signals)
· blocking
III. Binary outputs:
· none
IV. Measurements:
· none.