ABB REG316 4 Series - Page 391

REG 316*4 1MRB520049-Uen / Rev. F ABB Switzerland Ltd
3-353
D. Measurement module function settings (MeasureModule)
Summary of parameters:
Text Unit Default Min. Max. Step
ParSet 4..1 P1 (Select)
VoltageInp 0
CurrentInp CT/VT-Addr 0
PN
UN*IN*
Ö3
1.000 0.200 2.500 0.001
AngleComp Deg 0.000 -180 180 0.1
t1-Interval Select 15 min
PulseInp1 BinaryAddr F
Reset1 BinaryAddr F
ScaleFact1 1.0000 0.0001 1.0000 0.0001
Cnt1New SignalAddr
t2-Interval Select 15 min
PulseInp2 BinaryAddr F
Reset2 BinaryAddr F
ScaleFact2 1.0000 0.0001 1.0000 0.0001
Cnt2New SignalAddr
Explanation of parameters:
ParSet4..1
Parameter for determining in which set of parameters a par-
ticular function is active (see Section 5.11.).
VoltageInp
defines the voltage input channel. Only three-phase v.t’s can
be set and the first channel (R phase) of the group of three
selected must be specified.
Voltage and current inputs must be assigned before the
three-phase measurement part of the function can be
activated. If only the pulse counter part of the function is to be
used, both c.t. and v.t. inputs must be disabled.