REG 316*4 1MRB520049-Uen / Rev. E ABB Switzerland Ltd
5-133
· Creating the Spin.CNF file after entering ‘c’.
ÉÍ Select Organization Í» SMSBASE directory:
ºABB PoÉÍ Select Station Í» C:\SMS\BASE\
ÈÍÍÍÍÍͺABB BaÉÍ Select Object/Bay Í»
ÈÍÍÍÍÍͺNTP-2 REC316 45 º Appl. data directory:
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ C:\SMS\DATA-EX\
ÉÍ Edit communication parameters ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
ºPhone no: 161707 161707 º
ºConnection: Direct Direct º
ºSerial port: COM1 COM1 º
ºProtocol: SPA SRIO º
ºBaud rate: 9600 9600 º
ºParity: EVEN EVEN º
ºData bits: 7 7 º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
C=Create communication parameters
SPACE=next value ESC=quit ENTER=save
· Level 4:
The next level and the Select unit window are reached by
pressing <Enter>. Press ‘a’ to open the selection window.
Select for example REC 316 from this menu. Then select Re-
port station to if you wish to create one.
ÉÍ Select Organization Í» SMSBASE directory:
ºABB PoÉÍ Select Station Í» C:\SMS\BASE\
ÈÍÍÍÍÍͺABB BaÉÍ Select ObjecÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ÈÍÍÍÍÍͺNTP-2 ÉÍ Selecº A Manual Entry º Appl. data directory:
ÈÍÍÍÍÍÍÈÍÍÍÍÍÍͺ MODEM º C:\SMS\DATA-EX\
º OTHER º
º REC316 º
º REPORT STATION º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Organiz: ABB Power Automation Ltd
Station: ABB Baden
Obj/Bay: NTP-2 REC316 45
C=Create communication parameters
ESC=quit ENTER=select
To Next Page
Loading...
