ABB REG316 4 Series - Entering the SRIO Address for Reporting

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. E
5-138
· Level 5:
Press <Enter> to proceed to the Select module/part of unit
window and then the data input window Set Spacom slave
address. The default values in this window can be accepted.
ÉÍ Select Organization Í» SMSBASE directory:
ºABB PoÉÍ Select Station Í» C:\SMS\BASE\
ÈÍÍÍÍÍͺABB BaÉÍ Select Object/Bay Í»
ÈÍÍÍÍÍͺNTP-2 ÉÍÍÍÍÍÍÍÍ Select Unit ÍÍÍÍÍÍÍÍ» Appl. data directory:
ºNTP_2 ºREPORÉÍ Select Module/Part of Unit Í»SMS\DATA-EX\
ºReportÈÍÍÍÍͺREPORT STATION Configuration º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÉÍ Setting SPACOM slave address ÍÍÍÍÍÍÍ»
º º
º The module address is: 001 º
º New address: 001 º
º º
Organiz: ABB Power Automation Ltd ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Station: ABB Baden
Obj/Bay: Report NTP
Unit: REPORT STATION Configuration
Mod/Part: REPORT STATION Configuration
C=Create communication parameters S=Show transducer file
E=Edit A=Add D=Delete ESC=previous level ENTER=select
Take care not to enter a device address in this window.
5.14.5.4. Entering the SRIO address for ‘Reporting’
· Select the menu item Select from the main menu and then
the Select object/bay window (Level 3). Now select the report
station.
ÉÍSelect OrganizationÍ»
º ABBÉÍSelect StationÍ»
ÈÍÍÍͺ ABBÉÍSelect Object/BayÍ»
ÈÍÍÍͺ NTP-2 REC316 45 º
º NTP_2 REC316 94 º
º Report NTP º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Organiz: ABB Power Automation Ltd
Station: ABB Baden
F3 F5 Enter Esc
MODEM PASSWORD SELECT EXIT