ABB REG316 4 Series - Resetting SCS Data; RIO Information; VDEW Bus

REG 316*4 1MRB520049-Uen / Rev. C ABB Switzerland Ltd
6-13
No. of transmission
fails
Number of errors while transmitting a message, for
example, because the buffer on the PC card was not
available.
No. of lost incoming
messages
Number of messages lost, because the driver
receive buffer was full.
Delete MVB diag. info
Selecting this menu item resets the various diagnostic informa-
tion counters to zero.
Load MVB messages
Selecting this menu item displays the last message sent or
received and also the last event transmitted. These data are only
needed for development purposes and are not described in more
detail for that reason.
6.8.4. VDEW bus
No special information is available for the VDEW bus.
6.9. RIO information
Information is displayed on the status of the process bus and the
distributed input/output system. A detailed description of the data
is given in publication 1MRB520192-Uen.
6.10. Resetting SCS data
After entering his password, an authorised user can delete the
SCS input data.