Page 1
Features • Selectable protection functions
• Multitude of applications
• Setting menu-assisted with personal com-
puter by means of the Windows-based
operator program CAP2/316
• Fully numerical signal processing
• Continuous self-monitoring by hardware
• Cyclically executed testing routines, mostly
by software
• Setting of parameters and recording of the
settings
• Display of measured values
• Display of events, their acknowledgment
and printout
• Disturbance recording
• Self-documentation
• Long-term stability
• Serial port for communication
• Available for 19" rack mounting in panel,
surface or flush mounting.
• Four independent, user-selectable param-
eter sets able to be activated via binary
input
• Multi-activation facility of the available
functions
Application The main areas of application of the
REG316*4 terminal are the protection of gen-
erators, motors and unit transformers.
The modular design makes it extremely flexi-
ble and simple to adapt to the size of the pri-
mary system installation and the desired pro-
tection schemes to be included. Economic
solutions can thus be achieved in the full
range of applications for which it is intended.
Different degrees of redundancy are possible,
availability and reliability of the protection
can be chosen to suit the application by dupli-
cating of REG316*4 units, but also by multi-
ple configuration of the protection functions.
The use of standard interfaces makes
REG316*4 compatible with process control
systems. Different forms of data exchange
with higher process control levels are possi-
ble, e.g. one-way reporting of digital states
and events, measured values and protection
parameters.
Numerical generator protection REG316*4
1MRK502004-Ben
Issued: February 2002
Changed: since December 1999
Data subject to change without notice
To Next Page
Loading...
