18.6.12 Function commands user defined for IEC 60870-5-103
I103USRCMD
18.6.12.1 Functionality
I103USRCMD is a command block in control direction with user defined output
signals. These function blocks include the FunctionType parameter for each block in
the private range, and the Information number parameter for each output signal.
18.6.12.2 Identification
Function description Function block
name
IEC 60617
identification
ANSI/IEEE C37.2
device number
Function commands user defined for
IEC 60870-5-103
I103USRCMD - -
18.6.12.3 Function block
IEC10000284-1-en.vsd
I103USRCMD
BLOCK ^OUTPUT1
^OUTPUT2
^OUTPUT3
^OUTPUT4
^OUTPUT5
^OUTPUT6
^OUTPUT7
^OUTPUT8
IEC10000284 V1 EN
Figure 481: I103USRCMD function block
18.6.12.4 Signals
Table 769: I103USRCMD Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of commands
Table 770: I103USRCMD Output signals
Name
Type Description
OUTPUT1 BOOLEAN Command output 1
OUTPUT2 BOOLEAN Command output 2
OUTPUT3 BOOLEAN Command output 3
OUTPUT4 BOOLEAN Command output 4
OUTPUT5 BOOLEAN Command output 5
Table continues on next page
Section 18 1MRK502052-UEN B
Station communication
1046
Technical manual
To Next Page
Loading...
