ABB REG670 - Monitored Data

Name Values (Range) Unit Step Default Description
ValueMinCh4 -10000000000.000
- 10000000000.000
- 0.001 4.000 Min primary value corr. to IMinCh4
ValueMaxCh4 -10000000000.000
- 10000000000.000
- 0.001 20.000 Max primary value corr. to IMaxCh4
EnDeadBandCh5 Off
On
- - Off Enable amplitude deadband reporting for
channel 5
DeadBandCh5 0.00 - 20.00 mA 0.01 1.00 Deadband amplitude for channel 5
IMinCh5 -25.00 - 25.00 mA 0.01 4.00 Min current of transducer for Channel 5
IMaxCh5 -25.00 - 25.00 mA 0.01 20.00 Max current of transducer for Channel 5
ValueMinCh5 -10000000000.000
- 10000000000.000
- 0.001 4.000 Min primary value corr. to IMinCh5
ValueMaxCh5 -10000000000.000
- 10000000000.000
- 0.001 20.000 Max primary value corr. to IMaxCh5
EnDeadBandCh6 Off
On
- - Off Enable amplitude deadband reporting for
channel 6
DeadBandCh6 0.00 - 20.00 mA 0.01 1.00 Deadband amplitude for channel 6
IMinCh6 -25.00 - 25.00 mA 0.01 4.00 Min current of transducer for Channel 6
IMaxCh6 -25.00 - 25.00 mA 0.01 20.00 Max current of transducer for Channel 6
ValueMinCh6 -10000000000.000
- 10000000000.000
- 0.001 4.000 Min primary value corr. to IMinCh6
ValueMaxCh6 -10000000000.000
- 10000000000.000
- 0.001 20.000 Max primary value corr. to IMaxCh6
21.2.11.5 Monitored data
Table 916: MIM Monitored data
Name
Type Values (Range) Unit Description
STATUS BOOLEAN 0=Ok
1=Error
- Milliampere input module
status
CH1 REAL - - Analog input 1
CH2 REAL - - Analog input 2
CH3 REAL - - Analog input 3
CH4 REAL - - Analog input 4
CH5 REAL - - Analog input 5
CH6 REAL - - Analog input 6
CH1 REAL - A Service value analog
input 1
CH2 REAL - A Service value analog
input 2
CH3 REAL - A Service value analog
input 3
Table continues on next page
Section 21 1MRK502052-UEN B
IED hardware
1184
Technical manual