ABB REG670 - Mounting Procedure for Flush Mounting

21.4.1.2 Mounting procedure for flush mounting
1
3
5
4
2
6
IEC08000161-2-en.vsd
IEC08000161 V2 EN
Figure 556: Flush mounting details.
PosNo
Description Quantity Type
1 Sealing strip, used to obtain IP54 class. The sealing strip is factory
mounted between the case and front plate.
- -
2 Fastener 4 -
3 Groove - -
4 Screw, self tapping 4 2.9x9.5 mm
5 Joining point of sealing strip - -
6 Panel - -
1MRK502052-UEN B Section 21
IED hardware
1207
Technical manual