ABB REG670 - Functionality

14.6.2 Functionality
The Selector mini switch VSGAPC function block is a multipurpose function used for
a variety of applications, as a general purpose switch.
VSGAPC can be controlled from the menu or from a symbol on the single line
diagram (SLD) on the local HMI.
14.6.3 Function block
VSGAPC
BLOCK
PSTO
IPOS1
IPOS2
BLOCKED
POSITION
POS1
POS2
CMDPOS12
CMDPOS21
IEC14000066-1-en.vsd
IEC14000066 V1 EN
Figure 361: VSGAPC function block
14.6.4 Signals
Table 452: VSGAPC Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of function
PSTO INTEGER 0 Operator place selection
IPOS1 BOOLEAN 0 Position 1 indicating input
IPOS2 BOOLEAN 0 Position 2 indicating input
Table 453: VSGAPC Output signals
Name
Type Description
BLOCKED BOOLEAN The function is active but the functionality is
blocked
POSITION INTEGER Position indication, integer
POS1 BOOLEAN Position 1 indication, logical signal
POS2 BOOLEAN Position 2 indication, logical signal
CMDPOS12 BOOLEAN Execute command from position 1 to position 2
CMDPOS21 BOOLEAN Execute command from position 2 to position 1
Section 14 1MRK502052-UEN B
Control
766
Technical manual